How To Install A Dimmer Switch Youtube

Replacing a dated lite fixture with a beautiful ceiling medallion and chandelier is a smashing way to amend the look of a room. Adding a dimmer switch is a perfect style to control the level of lighting when entertaining.

Chandelier Size

At that place are several methods of determining the proper size of a chandelier:

• Room Size: The length and width of the room added together in feet should equal the bore of the chandelier in inches. Example: a 12′ past 12′ room should have a 24″ bore chandelier (12 + 12 = 24″).
• Table Size: In a dining room, the diameter of a chandelier should exist at least half the width of the table. Case: a 42″ wide table should accept a 21″ minimum diameter chandelier (42″ ÷ two = 21″). Another method is to make the diameter of the chandelier no larger than the width of the table minus 12″. Instance: a 42″ wide table should have a maximum xxx″ diameter chandelier (42″ – 12″ = 30″).

Chandelier Height

The acme of the chandelier is based on the ceiling height and location:

• Entry Hall: The lowest point of a chandelier should be a minimum of six½' from the floor. If possible, or with higher ceilings, hang it vii′ from the floor.
• Dining Tabular array: The lesser of a chandelier should exist at least 30″ above the dining table (59″-62″ from floor). For ceilings higher than 8′, add three″ for each additional pes of ceiling height. Instance: With a 10′ ceiling, the lesser of the chandelier should exist approximately 36″ above the top of the table.

Hanging a Chandelier

1. Starting time by determining the peak of the chandelier.
2. Side by side, cutting the support chain to length, leaving the electrical wire well-nigh vi" longer.
3. Turn the power to the light off at the excursion breaker box and remove the old ceiling fixture.
4. Run the wires through the trim ring and ceiling medallion, so through the hollow threaded tube in the center of the ceiling box.
5. Attach the wires to the house wiring using wire nuts.
6. Push button the medallion and trim band upward confronting the ceiling, screw on the lock nut, and attach the concatenation.

Installing a Dimmer Switch

1. Select a dimmer switch that has a rated chapters high plenty to handle the combined wattage of all the bulbs in the chandelier added together.
2. Plough the power off to the fixture at the breaker.
3. Remove the comprehend and existing switch.
4. Adhere the dimmer to the wires using wire basics.
5. Fit the wires dorsum in the box, and screw the switch to it.
6. Replace the cover and turn on the power.

CFLs and Dimmer Switches

Compact fluorescent low-cal bulbs (CFL) tin't be used with a dimmer switch unless they specifically land that they are designed to work with a dimmer switch.

For more than on different types of lighting for your home, come across our article
Interior Lighting: Adding a Pleasant Atmosphere.

Source: http://todayshomeowner.com/video/how-to-install-a-chandelier-and-dimmer-switch/

Posted by: carlislewithating.blogspot.com

Share this post